Sunday, January 8, 2012

How do I tune and adjust fuel / air flow for my new edelbrock carb?

Not sure what carb it is but its fairly new and is on a 351w.|||go to a good university, get yourself a degree in engineering and only then will you be able to adjust your new edelbrock carb.or you could save alot of trouble and just get a holly or barry grant carb.|||find a 5 gas analyzer and look at exhaust. you want o2 and co to be as low as possible, and try to get co2 as high as you can.





other than that, there are instructions somewhere (edel site?) about setting base adjustments, then go lean or rich based on exhaust smoke, engine running condition, spark plug condition. i have had best results going rich and backing off, less overheating and detonation that way

No comments:

Post a Comment